No more leads in the hopper for campaign: fixing it in VICIdial
What VICIdial's "No more leads in the hopper for campaign" alert means on manual dialing, what causes it, and where to look in admin.php to fix each cause.

To the point
"No more leads in the hopper for campaign" is a manual dialing message. VICIdial shows it when an agent clicks DIAL NEXT NUMBER and the server has no lead to give that agent. Auto-dial campaigns never show it.
- Usually the hopper is empty. Sometimes it is full and the agent has hit a personal limit.
- The hopper script runs once a minute from its own cron line. If it stops, this is the symptom.
- On a MANUAL campaign the Minimum Hopper Level decides the hopper's size, not the automatic level.
- "Leads to be dialed" and "leads in the hopper" are different counts. Read both.
What the alert means
The hopper is a short queue of the next leads for each campaign, the vicidial_hopper table. Each click on DIAL NEXT NUMBER claims the top READY row, highest priority first, and stamps it with that agent's user. That is why two agents never get the same lead. When there is no row to claim, the server answers HOPPER EMPTY and the screen shows the alert.

- DIAL NEXT NUMBER asks the server for the next lead in this campaign's hopper.
- Agent Alert! The server had none to give, so the box names the campaign: SUNQ4.
With No Hopper Dialing on, Dial Next searches the lists directly, and finding nothing gives the same words. So the alert does not tell you whether the hopper is in use. At login, an empty hopper shows "Sorry, there are no leads in the hopper for this campaign" instead, unless Allow No-Hopper-Leads Logins is Y.
Dial Next has other refusals, for a number outside its calling hours, on the DNC list or over its call count. Each has its own alert. They are not this one.
Step 1: find out which case you have
Open the campaign in admin.php. The Basic View carries two counts under the lists.

- The list row: the list is attached, Active is Y, and it holds 1,200 leads.
- Leads to be dialed in those lists: counted when the page loads. Leads not called since the last reset, in a dial status, inside calling hours, after the call count limits, the lead filter and the list expiry.
- Leads in the dial hopper: what DIAL NEXT NUMBER draws from right now.
Read them together:
- Both zero: nothing is left to dial. Go to step 4.
- Leads to dial, but the hopper is empty: the hopper is not filling. Go to step 3.
- Leads in the hopper, and one agent still gets the alert: go to step 2.
Step 2: the agent's own limit

- Max Manual Dial Hopper Calls: the most DIAL NEXT NUMBER calls this agent may place in a day, counted across all campaigns. 0 means no limit.
- Max Manual Dial Hopper Calls Per Hour: the same, per hour.
At either limit, VICIdial answers the next click exactly as if the hopper were empty. Check hopper calls today and hopper calls this hour beside the fields, then raise the limit or set it to 0. The daily count is cleared by VICIdial's nightly housekeeping.
Step 3: the hopper is not filling
First check that the hopper script runs at all. AST_VDhopper.pl has its own line in root's crontab and runs every minute. If it is missing or failing, no campaign fills, and the agent screen cannot tell you.
If it runs, it writes why it added nothing. Read the row in vicidial_campaign_stats_debug where server_ip is HOPPER. Our guide to why VICIdial is not dialing walks its checks in order.

- Minimum Hopper Level: how many leads the script keeps. VICIdial's advice is slightly more than you go through in a minute.
- Automatic Hopper Level: Y sizes it from agents, Auto Dial Level, Dial Timeout and the multiplier, but only when that beats the minimum. On MANUAL the Auto Dial Level is 0, so the minimum always wins.
- Automatic Hopper Multiplier: below 1 loads fewer leads, above 1 more.
The script also skips leads for a lead filter whose SQL matches nothing, call count and daily limits, drop lockout, list mix, and Auto Trim Hopper.
Step 4: nothing left to dial
Check:
- Active on the list is Y, and its Expiration Date is in the future.
- Dial Statuses include the statuses your leads now have. With only NEW, a called lead never comes back.
- Local Call Time covers the hours you are dialing.
Then load fresh leads, or use Reset Lead-Called-Status for this list.
Questions people ask
Why does one agent get the alert while others keep dialing?
Their personal limit. Max Manual Dial Hopper Calls counts that agent's Dial Next calls across all campaigns.
The Basic View says thousands of leads to dial. Why is the hopper empty?
That count has not run the hopper's own checks, and it says nothing about whether the hopper script is running. Start with step 3.
Can agents log in to a campaign with an empty hopper?
Only if Allow No-Hopper-Leads Logins is Y.
Next steps
On a managed VICIdial server from Trustane, the board flags a hopper that runs dry and the campaign's Why isn't it dialing? tab walks the same checks. See VICIdial pricing, or start a server free for 7 days.
VICIdial is a trademark of its owner. Trustane is an independent hosting provider.
Sources
- Trustane notes on the VICIdial 2.14 source, the Dial Next alert, the hopper script and the help text
- Trustane hopper diagnostic report, read from AST_VDhopper.pl
- Cover photo on Pexels
Managed VICIdial hosting


