# VICIdial setup, start to first call: server, carrier, agents

> VICIdial setup with no install to run: order a server, add a SIP carrier, create a campaign, load leads, add agents and take the first call.

URL: https://trustane.com/guides/vicidial-setup-first-call
By Trustane. Published 2026-11-11, updated 2026-11-19.

> **To the point**
> VICIdial setup usually starts with an install: ViciBox from its ISO, or a scratch install on another Linux, and then admin.php for everything else. On a Trustane server there is no install to run. From an empty account to the first call is six steps in the console:
>
> 1. **Order a server**: pick where it runs and its size. We build VICIdial on it.
> 2. **Add a carrier**: 4 steps, no dial plan to write.
> 3. **Create a campaign**: pick one of seven kinds, in 5 steps.
> 4. **Load leads**: through VICIdial's own lead API.
> 5. **Add agents**: one or a hundred, with a login card each.
> 6. **Take the first call**: agents sign in, and the calls start.

Video: [VICIdial carrier setup: add a SIP trunk in 4 steps, no dial plan to write](https://www.youtube.com/watch?v=-tvYDE9R-9k)

Each step links to its own guide. The pictures come from our demo account, with made-up names and addresses.

## 1. Order a server

Open **Order**, then pick:

1. **VPS** or **Dedicated** cores.
2. A **location**: the one closest to the numbers you call.
3. A **size**. Each size shows its hourly price, the most it costs in a month, and about how long the build takes.

Then **Place order**. We build the server and put VICIdial on it, and its VICIdial logins appear in the console a few minutes later. [VICIdial pricing](https://trustane.com/vicidial-pricing) lists every size, and [how many calls one server carried in our load test](https://trustane.com/blog/vicidial-concurrent-calls-per-server) helps you pick one.

Already have a VICIdial server? [Connect it to the console](https://trustane.com/blog/connect-existing-vicidial-server) instead.

## 2. Add a carrier

The carrier is the phone line VICIdial dials out on and takes calls from. Open the server, then **Carriers**, then **Add carrier**:

1. **Provider**: pick Twilio, Telnyx, RingCentral or another SIP provider.
2. **Connect**: the SIP server, then a username and password, or your server's IP instead.
3. **Calls**: a dial prefix, checked on the server as you type.
4. **Review**: the exact carrier entry and dial plan VICIdial gets.

![The carrier's Review step: what happens in order, and What VICIdial gets open with the carrier entry and its dial plan](https://trustane.com/media/bedc78ab666d1fa1-1432x1498.webp "A carrier's Review step, before Add carrier")

Asterisk loads the new carrier in about a minute. [VICIdial carrier setup: add a SIP trunk in 4 steps](https://trustane.com/guides/vicidial-carrier-setup-sip-trunk) walks through each step.

## 3. Create a campaign

Open **Campaigns**, then **New campaign**. The page has 5 steps: **What kind**, **Basics**, **How it behaves**, **Leads** and **Review**.

![New campaign, step 1 of 5: Manual / Preview and Auto-dial, each with its flow and how many agents it needs](https://trustane.com/media/4ce9e52f66068152-1600x752.webp "Step 1: what kind of campaign")

Seven kinds, each with how many agents it needs:

| Kind | What it does | Needs |
|---|---|---|
| Manual / Preview | Agents see each lead, then dial it or skip it | 1 agent |
| Auto-dial | Dials a set number of lines for each ready agent | 1 agent |
| Predictive | Paces itself toward a 3% dropped-call target | 3 agents |
| Inbound | Agents take the calls that come in to your queues | 1 agent |
| Blended | The same agents take queue calls and outbound calls | 1 agent |
| Broadcast | Plays a recorded message to every answered call | no agents |
| Press-1 / Survey | Plays a message, and a key press puts the caller through | no agents |

**Basics** asks for the name, the campaign ID (checked against the server's as you type) and the caller ID. Set a caller ID people can call back: left blank, calls show `0000000000`, and the page warns you. Press-1 has [a guide of its own](https://trustane.com/guides/vicidial-press-1-campaign-setup).

After **Create**, **Ready to dial?** checks three things: leads, agents and caller ID.

## 4. Load leads

From **Ready to dial?**, **Load leads** opens the list the campaign made. The loader puts each lead in through VICIdial's own lead API, so VICIdial's own code checks duplicates, your do-not-call lists and area codes, and sets each lead's time zone. You get a result to read and a file of the rows it refused.

## 5. Add agents

Open **People**, then **Add many**: agents by a list, or by a series of numbers. Each agent gets a login card: where to sign in, the phone login and its password, the user and its password. [Add 100 VICIdial agents at once](https://trustane.com/guides/vicidial-add-many-agents) shows the whole sheet.

Their phones work in about a minute.

## 6. The first call

Each agent signs in at the address on their card, with the phone login and the user on it, and picks the campaign. An auto-dial campaign then dials the leads for its ready agents; on a Manual one, each agent dials. An inbound campaign sends agents the calls from the queues they take at sign-in.

> **If nothing dials**
> - **The campaign is Manual**: agents dial each lead themselves.
> - **No leads**: the list is empty or switched off, or none is inside the campaign's calling hours.
> - **No ready agents**: agents sign in paused, and have to press Ready.
> - **The carrier refuses the call**: check it is signed in or reachable on **Carriers**, and that it accepts the campaign's caller ID.

## On a plain install, for comparison

The same path starts with installing VICIdial and its database, then a server, a carrier, a campaign, a list, users and phones, each one a form in admin.php. A carrier there means writing its account entry and its dial plan entry by hand. If you install it yourself, [ViciBox 12 after install](https://trustane.com/blog/vicibox-12-after-install) and [the install traps we hit on Ubuntu 24.04](https://trustane.com/blog/vicidial-ubuntu-24-04-install-traps) cover what to check.

## Questions people ask

### Do I have to install VICIdial?

Not on a server you order here: we build it. On your own hardware, you install it, and you can [connect it](https://trustane.com/blog/connect-existing-vicidial-server) to the console afterwards.

### Can I still use admin.php?

Yes. It is VICIdial's own admin screen, and it stays on your server. The console sits beside it.

### How long does setup take?

The build shows its time on the order page. The rest is the six steps above; a carrier loads in about a minute, and agents' phones work in about a minute.

## Next steps

- [VICIdial carrier setup: add a SIP trunk in 4 steps](https://trustane.com/guides/vicidial-carrier-setup-sip-trunk).
- [Add 100 VICIdial agents at once](https://trustane.com/guides/vicidial-add-many-agents) and [assign in-groups to agents](https://trustane.com/guides/vicidial-assign-in-groups-to-agents).
- [Order a server](https://trustane.com/order).

VICIdial is a trademark of its owner. Trustane is an independent hosting provider. Twilio, Telnyx and RingCentral are trademarks of their respective owners. Trustane is not affiliated with them.
