# VICIdial firewall: allow your office IP and block an address

> Use the VICIdial firewall screen in the Trustane console to see who is signed in, allow an office IP, block an address and read failed sign-ins.

URL: https://trustane.com/guides/vicidial-firewall-allow-block-ip
By Trustane. Published 2026-11-18.

> **To the point**
> The VICIdial firewall on a Trustane server is managed from one screen, **Firewall**:
>
> 1. Read who is signed in, and from which address.
> 2. Press **Add IP** to allow an office address, so it skips the sign-in page.
> 3. Choose **Block** to shut an address out.
> 4. Open **Failed sign-ins** and block an address from its line.

Video: [VICIdial root access: the terminal and the firewall in the console](https://www.youtube.com/watch?v=feIUOtY9rMY)

These screens are from our demo account, so every name and address shown is invented.

## How people reach the server

With the firewall on, the server's web and SIP ports are closed to the internet. An agent or an admin first opens the server's sign-in page and signs in with their VICIdial user. The server then lets that address in for 24 hours.

The Firewall screen shows the result as five counts.

![Firewall on, with five counts: Signed in now 4, Allowed 3, Blocked 2, Failed sign-ins in 24 h 4, and Carrier addresses 2](https://trustane.com/media/7c5d4dd9930aeecf-1600x262.webp "The five counts at the top of the Firewall screen")

- **Signed in now**: addresses that came through the sign-in page.
- **Allowed**: addresses that reach the server without signing in.
- **Blocked**: addresses that cannot open the sign-in page.
- **Failed sign-ins, 24 h**: wrong passwords and refused attempts.
- **Carrier addresses**: your carriers' addresses, let through for calls. This list is shown and cannot be edited here.

## 1. See who is signed in

The first tab lists each signed-in address with the person, whether they opened the admin screens or the agent screen, when they signed in and how much time is left.

![Signed in now: four addresses with the owner and three agents, the screen each opened, the sign-in time and the time left, with Always allow and Sign out on each line](https://trustane.com/media/b3813ae14c929819-1600x465.webp "Each signed-in address, and the time it has left")

Each line has two actions:

- **Always allow** adds the address to the Allowed list.
- **Sign out** takes the address off the signed-in list. The person signs in again to come back.

## 2. Allow your office address

An office with a fixed address does not need the sign-in page every day.

1. Press **Add IP**.
2. Keep **Allow** selected.
3. Type the address, or a range such as `203.0.113.0/24`.
4. Give it a label, such as the office name.
5. Choose how long it lasts: permanent, 24 hours, 7 days, 30 days, or until a date.
6. Press **Allow**.

![The Allow an IP form: Allow or Block, IP or range, Label, and Lasts set to Permanent](https://trustane.com/media/088f6fb46777a235-1016x910.webp "One form for allowing and for blocking")

Everyone behind that address then reaches the server without signing in at the sign-in page. Allow only addresses you control.

The **Allowed** tab lists each entry with its label, how long it lasts, who added it and when. An entry with an end date leaves the list by itself when its time is up, and **Remove** takes one off at once.

## 3. Block an address

Press **Add IP** and choose **Block**. The form is the same: address or range, label and how long.

On the server, the Blocked list is checked before the Allowed list and before the sign-ins. A blocked address cannot open the sign-in page, and an address that was signed in is cut off.

Three kinds of address stay reachable whatever you block: Trustane's own management address, the other servers of your cluster, and your carriers' addresses for calls. That way a block cannot cut the server off from its calls or from the console.

To undo a block, open the **Blocked** tab and press **Remove** on its line.

## 4. Block from the failed sign-ins

The **Failed sign-ins, 24 h** tab lists each failed attempt at the sign-in page: the time, the address, the user name that was tried and the result. Results include a wrong password, too many tries and a user level that is not allowed in.

![Failed sign-ins: three attempts as root and admin from 192.0.2.66 ending in Too many tries, and one refused agent sign-in with a Block button](https://trustane.com/media/e0885d0c3360ce6a-1600x451.webp "Failed attempts, with the address and the name tried")

A line whose address is not blocked yet has a **Block** button.

The **History** tab keeps the sign-in attempts the server has, newest first, and the chart above the tabs shows signed-in and failed attempts for the last 7 days. Press **Show as a table** under the chart to read the same figures as numbers.

## Blocking from the SSH side

SSH has its own lists on the Terminal page. A sign-in over SSH from an unknown address can be blocked from there, and the block lands on the same Blocked list. [The terminal guide](https://trustane.com/guides/vicidial-root-access-browser-terminal) shows where.

## Next steps

- [Open your server's terminal in the browser](https://trustane.com/guides/vicidial-root-access-browser-terminal).
- [Securing a VICIdial server](https://trustane.com/blog/securing-a-vicidial-server): what a default-deny firewall protects.
- [Order a server](https://trustane.com/order). A new server costs nothing for its first 7 days.

VICIdial is a trademark of its owner. Trustane is an independent hosting provider.
