# What a predictive dialer does, with a VICIdial example

> A predictive dialer places more calls than it has free agents, betting that many will not be answered. The pacing arithmetic, shown with VICIdial settings.

URL: https://trustane.com/blog/what-is-a-predictive-dialer
By Trustane. Published 2026-10-17, updated 2026-11-05.

> **To the point**
> A predictive dialer calls more numbers than it has free agents, because most calls are never answered by a person. Each answered call goes to whichever agent is free. Agents talk more and wait less. The cost is the occasional dropped call, when more people answer than there are agents.
>
> - In VICIdial the pace is the **dial level**, lines per ready agent. Level 2.0 with 10 agents ready means 20 calls.
> - The adaptive methods (`ADAPT_*`) move the level to hold a drop limit, often 3 percent.
> - It needs a real team. With one or two agents the averages it relies on are noise.
> - Check the server's line limit first. ViciBox 12 ships with 23 lines for the whole box.

## What it is

Dial by hand and most of an agent's hour goes on calls that do nothing: ringing out, busy, voicemail. If one dial in four reaches a person, an agent who dials one number at a time spends most of the shift waiting.

A predictive dialer dials for the agents, several numbers at once, and before they are free. Whoever answers goes to the next ready agent. Your answer rate decides how hard it can push, and that depends on the list, the hour, the carrier and the caller ID.

## One pacing loop, step by step

VICIdial's goal on each loop is the dial level times the agents it counts, minus the calls already in progress. With invented numbers:

1. Ten agents are READY and the dial level is 2.0, so the goal is 20 lines.
2. The dialer places 20 calls. Most ring out or hit a machine. Four people answer.
3. Ten agents were free and four people answered, so all four are connected. Six agents keep waiting.

![Diagram: 10 ready agents, 20 calls placed, 4 answered and connected, and a drop at level 4.0](https://trustane.com/media/4b53e98c5337a694-1600x1020.webp "One loop at level 2.0, and how the same arithmetic produces a drop")

The trouble starts when few agents are free. At 4.0 with three agents free the goal is 12 lines. If five of those answer together, two people hear silence. That is a drop.

## The four dial methods in VICIdial

VICIdial sets this per campaign in `dial_method`:

| Method | Who sets the pace | When it fits |
|---|---|---|
| `MANUAL` | The agent, one number at a time | Small lists, calls that need research first |
| `RATIO` | You, a fixed number of lines per agent | Steady answer rates, small teams |
| `ADAPT_*` (four variants) | A script, aiming at a drop limit | Larger teams, answer rates that move |
| `INBOUND_MAN` | Agents dial by hand between inbound calls | Blended inbound and outbound |

"Predictive" usually means the `ADAPT_*` family, and sometimes `RATIO` above 1.0. The manual's predictive example uses `ADAPT_TAPERED`, a 3 percent drop limit and a maximum level of 3.0, and warns against it with only one or two agents. The scripts watch recent drops and move the level within 15 to 30 seconds, never above `adaptive_maximum_level`. The fields are covered in [the dial level post](https://trustane.com/blog/vicidial-dial-level-explained).

> **The drop limit is a legal question**
> Whether 3 percent is right for your calls depends on where you call and under which rules. See [the abandon rate post](https://trustane.com/blog/vicidial-abandon-rate-3-percent) and check the rules that apply to you. Compliance is the customer's responsibility.

## Set it up, step by step

These are real screens from our test server, on a campaign called Sunline Solar Q4 callbacks (`SUNQ4`). The red numbers match the steps under each picture.

### In VICIdial's admin

![VICIdial admin: the Campaigns menu and the SUNQ4 campaign row highlighted](https://trustane.com/media/fcba825eeec35237-1380x380.webp "Campaigns, then the campaign you want to change")

1. Open **Campaigns** in the left menu.
2. Click the campaign ID, here `SUNQ4`, to open its settings.

![VICIdial campaign page with Dial Method, Auto Dial Level, Drop Percentage Limit and Maximum Adapt Dial Level highlighted](https://trustane.com/media/0a8abbaf7dbb32d5-1600x575.webp "The four pacing fields, close together on the campaign page")

1. **Dial Method**: choose `ADAPT_TAPERED`.
2. **Auto Dial Level**: the level it starts from. 1 is a safe start.
3. **Drop Percentage Limit**: the drop rate the pacing tries to stay under.
4. **Maximum Adapt Dial Level**: the ceiling. The manual's example uses 3.0.

![VICIdial campaign page with Drop Call Seconds and Drop Action highlighted](https://trustane.com/media/7daa0ea56c9779d9-1600x250.webp "Further down the same page: what counts as a drop, and what the caller hears")

1. **Drop Call Seconds**: how long an answered call may wait for an agent before it counts as dropped.
2. **Drop Action**: what that caller gets. `AUDIO` plays the safe harbor message set just below it.

Scroll to the bottom of the page and click **SUBMIT**. Nothing changes until you do.

![VICIdial server record with Max Trunks highlighted and the server address blurred](https://trustane.com/media/f6e05f6235f0db29-1600x500.webp "Admin, Servers, then your server: the line limit for the whole box")

1. **Max Trunks**: the lines the whole server may use. Our test box is set to 100. A fresh ViciBox 12 install has 23.

### In the Trustane console

![Trustane console campaign sheet for SUNQ4 with the Set Up tab and the Predictive type highlighted](https://trustane.com/media/ee4bf01d566021df-1328x514.webp "Campaigns, click the campaign, then Set Up")

1. Open **Campaigns**, click the campaign and choose **Set Up**.
2. **Type** should say Predictive. If it does not, use **Change type**.

![Trustane console with Speed, Server lines, Target drop rate and Highest level highlighted](https://trustane.com/media/46cb1bc7589f9ff1-1600x1087.webp "Pacing and the server's real line limit on one screen")

1. **Speed**: the dial level, lines per free agent. On a predictive campaign the pacing moves it on its own.
2. **Server lines**: the limit read from the server itself, so you can see when it caps the ratio.
3. **Target drop rate**: the same field as Drop Percentage Limit in VICIdial.
4. **Highest level**: the same as Maximum Adapt Dial Level.

Changes collect into one **Save**, and the dialer gets one reload signal.

## What a real floor looked like

From a migrated history of about 1.1 million calls: at its busiest, that floor ran 62 concurrent calls with 19 agents, about three lines per agent. One floor, one list, one carrier, so an example and not a target.

Three lines per agent also needs a server that allows it. ViciBox 12 ships with 23 lines for the whole box, which is fewer than eight agents at that ratio. Our post on [lines per agent](https://trustane.com/blog/vicidial-lines-per-agent-capacity) has the full table.

## What it needs around it

- **Enough agents.** Two agents do not make an average.
- **A full hopper.** If `vicidial_hopper` is empty, nothing dials. See [why a campaign is not dialing](https://trustane.com/guides/why-vicidial-is-not-dialing-hopper).
- **A plan for answering machines.** Detection takes seconds per call. See [AMD on ViciBox](https://trustane.com/blog/vicidial-amd-conf-ignored-vicibox).
- **A carrier that accepts the volume.** Predictive campaigns make many short, unanswered calls. Read your carrier's terms.

> **Start low**
> Put a new list on `RATIO` at a low level for its first shifts and read the answer rate before you switch to an adaptive method. You learn the list before the dialer starts guessing about it.

## How to tell if it is behaving

Read the real-time report, then the drop percentage, then the hopper.

- Agents waiting, no drops: it is under-dialing.
- Agents never waiting, drops rising: it is over-dialing.
- Agents waiting with the level at its maximum: something else is the limit. See [what we check when agents sit idle](https://trustane.com/guides/vicidial-agents-idle-while-dialing).

## When not to use it

Skip it when each call needs preparation, when every answered call is rare and valuable, when the team is tiny, or when no dropped call is acceptable. `MANUAL` with preview, or a low `RATIO`, fits those better.

## Questions people ask

### Is a predictive dialer the same as a power dialer?

Not quite. A power dialer places a fixed number of calls per agent, which in VICIdial is `RATIO`. A predictive dialer changes that number as answer and drop rates move, which is the `ADAPT_*` family.

### Will it get more conversations per hour?

Usually, but we have not measured it ourselves. We did not run manual against predictive on the same list, so we cannot give you a figure. Any figure you see quoted belongs to one list at one time.

## Next steps

Check the line limit, the drop settings and the calling hours before the first live shift. When you want to try it with real agents, [order a hosted server](https://trustane.com/order) or [see pricing](https://trustane.com/vicidial-pricing).

VICIdial is a trademark of its owner. Trustane is an independent hosting provider.
