# No more leads in the hopper for campaign: fixing it in VICIdial

> What VICIdial's "No more leads in the hopper for campaign" alert means on manual dialing, what causes it, and where to look in admin.php to fix each cause.

URL: https://trustane.com/blog/vicidial-no-more-leads-in-the-hopper
By Trustane. Published 2026-11-03.

> **To the point**
> "No more leads in the hopper for campaign" is a manual dialing message. VICIdial shows it when an agent clicks DIAL NEXT NUMBER and the server has no lead to give that agent. Auto-dial campaigns never show it.
>
> - Usually the hopper is empty. Sometimes it is full and the agent has hit a personal limit.
> - The hopper script runs once a minute from its own cron line. If it stops, this is the symptom.
> - On a MANUAL campaign the Minimum Hopper Level decides the hopper's size, not the automatic level.
> - "Leads to be dialed" and "leads in the hopper" are different counts. Read both.

## What the alert means

The hopper is a short queue of the next leads for each campaign, the `vicidial_hopper` table. Each click on DIAL NEXT NUMBER claims the top `READY` row, highest priority first, and stamps it with that agent's user. That is why two agents never get the same lead. When there is no row to claim, the server answers `HOPPER EMPTY` and the screen shows the alert.

![VICIdial agent screen with the No more leads in the hopper alert after Dial Next Number](https://trustane.com/media/b741c9eb83d5ffdb-1440x880.webp "On our test server, campaign SUNQ4, one click after every lead was called.")

1. **DIAL NEXT NUMBER** asks the server for the next lead in this campaign's hopper.
2. **Agent Alert!** The server had none to give, so the box names the campaign: SUNQ4.

With **No Hopper Dialing** on, Dial Next searches the lists directly, and finding nothing gives the same words. So the alert does not tell you whether the hopper is in use. At login, an empty hopper shows "Sorry, there are no leads in the hopper for this campaign" instead, unless **Allow No-Hopper-Leads Logins** is Y.

Dial Next has other refusals, for a number outside its calling hours, on the DNC list or over its call count. Each has its own alert. They are not this one.

## Step 1: find out which case you have

Open the campaign in admin.php. The Basic View carries two counts under the lists.

![VICIdial campaign Basic View showing 0 leads to be dialed and 0 leads in the dial hopper](https://trustane.com/media/2e03fe820791db88-1600x373.webp "Our test campaign: 1,200 leads in an active list, none left to dial.")

1. **The list row**: the list is attached, **Active** is Y, and it holds 1,200 leads.
2. **Leads to be dialed in those lists**: counted when the page loads. Leads not called since the last reset, in a dial status, inside calling hours, after the call count limits, the lead filter and the list expiry.
3. **Leads in the dial hopper**: what DIAL NEXT NUMBER draws from right now.

Read them together:

- Both zero: nothing is left to dial. Go to step 4.
- Leads to dial, but the hopper is empty: the hopper is not filling. Go to step 3.
- Leads in the hopper, and one agent still gets the alert: go to step 2.

## Step 2: the agent's own limit

![VICIdial user page with Max Manual Dial Hopper Calls per day and per hour](https://trustane.com/media/1754274253de15a5-1600x231.webp "The agent's user page. The counts beside each field show where they stand.")

1. **Max Manual Dial Hopper Calls**: the most DIAL NEXT NUMBER calls this agent may place in a day, counted across all campaigns. 0 means no limit.
2. **Max Manual Dial Hopper Calls Per Hour**: the same, per hour.

At either limit, VICIdial answers the next click exactly as if the hopper were empty. Check **hopper calls today** and **hopper calls this hour** beside the fields, then raise the limit or set it to 0. The daily count is cleared by VICIdial's nightly housekeeping.

## Step 3: the hopper is not filling

First check that the hopper script runs at all. `AST_VDhopper.pl` has its own line in root's crontab and runs every minute. If it is missing or failing, no campaign fills, and the agent screen cannot tell you.

If it runs, it writes why it added nothing. Read the row in `vicidial_campaign_stats_debug` where `server_ip` is `HOPPER`. Our [guide to why VICIdial is not dialing](https://trustane.com/guides/why-vicidial-is-not-dialing-hopper) walks its checks in order.

![VICIdial campaign settings for Minimum Hopper Level and Automatic Hopper Level](https://trustane.com/media/d61a2bf21f2ca14e-1600x267.webp "Campaign SUNQ4, Modify Campaign: the three settings that size the hopper.")

1. **Minimum Hopper Level**: how many leads the script keeps. VICIdial's advice is slightly more than you go through in a minute.
2. **Automatic Hopper Level**: Y sizes it from agents, Auto Dial Level, Dial Timeout and the multiplier, but only when that beats the minimum. On MANUAL the Auto Dial Level is 0, so the minimum always wins.
3. **Automatic Hopper Multiplier**: below 1 loads fewer leads, above 1 more.

The script also skips leads for a lead filter whose SQL matches nothing, call count and daily limits, drop lockout, list mix, and Auto Trim Hopper.

## Step 4: nothing left to dial

Check:

- **Active** on the list is Y, and its **Expiration Date** is in the future.
- **Dial Statuses** include the statuses your leads now have. With only NEW, a called lead never comes back.
- **Local Call Time** covers the hours you are dialing.

Then load fresh leads, or use **Reset Lead-Called-Status for this list**.

> **Before you reset a list**
> A reset makes every lead in a dial status callable again, including ones called recently. Check your DNC list and your calling rules first.

## Questions people ask

### Why does one agent get the alert while others keep dialing?

Their personal limit. Max Manual Dial Hopper Calls counts that agent's Dial Next calls across all campaigns.

### The Basic View says thousands of leads to dial. Why is the hopper empty?

That count has not run the hopper's own checks, and it says nothing about whether the hopper script is running. Start with step 3.

### Can agents log in to a campaign with an empty hopper?

Only if Allow No-Hopper-Leads Logins is Y.

## Next steps

On a [managed VICIdial server](https://trustane.com/vicidial-hosting) from Trustane, the board flags a hopper that runs dry and the campaign's **Why isn't it dialing?** tab walks the same checks. See [VICIdial pricing](https://trustane.com/vicidial-pricing), or [start a server](https://trustane.com/order) free for 7 days.

VICIdial is a trademark of its owner. Trustane is an independent hosting provider.
